Products |
|
Impedance Analysis |
|
LCR |
|
Wound Component |
|
Accurate high frequency measurements combined with an easy to use graphical interface and high resolution colour TFT display.
All analyzers have a 0.05% basic accuracy, a minimum frequency of
20Hz and a maximum frequency up to 120MHz depending
on model.
The range consists of the
6505B,
6510B,
6515B,
6520B,
6530B,
6550B and
65120B |
A range of LCR meters and analyzers with basic accuracy
from 0.1% to 0.02%.
The 4230,
4265 and
4270 are the entry level products.
For ultimate accuracy choose the
6430B or
6440B. |
The 3255BL,
3255B,
3255BQ
and 3260B enable
wound components to be fully characterized to a basic accuracy of
0.1%.
DC bias up to 25A may be applied during component
testing using the high current DC Bias Unit
3265B/25A
or 3265BQ/25A.
For lower current applications the 3265B/10A and
3265B/5A are available.
Multiple units may be used to increase the bias current up to 125A.
|
|
more information... |
more information... |
more information... |
|
|
Transformer |
|
Telecommunication |
|
Impulse Surge Tester |
|
Transformers are wound components which have unique
characteristics.
The 3255BL,
3255B,
3255BQ and
3260B
are wound component and transformer analyzers offering many transformer
specific measurement functions.
If enhanced DC bias current capability
is required then the 3265B
or 3265BQ may be specified. For lower current applications the 3265B/10A and
3265B/5A are available.
Multiple units may be used to increase the bias current up to 125A.
|
The
3261A
test system automates the testing of transformers and POTS used
in ADSL and ISDN communication systems.
A dedicated fixture system
enables a wide range of components to be accurately production tested.
|
The
7720
is a multiple winding tester suitable for armature, transformer,
and inductor non destructive analyzer.
Test functions include Corona
and Flutter to 5000 Volts DC with data analysis. |
|
more information... |
more information... |
more information... |
|
|
Cable Harness Tester |
|
Modulation Analysis |
|
DC Power Source |
|
The 8687 is a 4-wire multiple test point cable tester which can automatically learn cable connections.
Tests include Open/Short, Conductance, Resistance, Capacitance, Diode and Hipot/Insulation with each test generating a PASS/FAIL report.
The 8681 is available where only 2-wire test accuracy is required.
|
The
257 is
a portable AM/FM 2GHz modulation meter with three band pass filters.
GPIB and battery operation are optional. |
A range of single, triple, and quad output, lightweight, programmable power supplies with power outputs to 1000 watts.
RS232 and GPIB control available on many of the instruments.
|
|
more information... |
more information... |
more information... |
|
|
Accessories |
|
|
A range of accessories which includes fixtures, leads, Kelvin clips and SMD
tweezers.
All the accessories are designed to ensure that accurate measurements can be made
with a wide variety of components. |
|
more information... |
|
|
